DPSS Green Laser Module

DPSS 532nM Laser
Diode_Pumped Green Laser
Stable 532nM Laser
DPSS 532nM Laser Modules

General Specifications:

  • Wavelength: 532nM
  • Beam Divergence: As low as 0.25mrad
  • Output Power: up to 250mW.
  • Complete laser head and laser driver.
  • Operating Current: as low as 150mA
  • Power Stability: as low as 2%./hr
  • Size: as small as Dia. 12 x 20mm
  • Operating temperature: 15 - 35 °C,
  • Optional TEC


  • NEW Micro watt power 532nM Laser Module
    Item No.: GM32-005MIC

    Micro Watt Diode_Pumped Green Laser
  • Output power, CW: 2 to 5 µW ,adjustable, TEMoo
  • Line width: < 0.2 nM
  • Power stability: < 2.5%
  • Pointing stability: 50 µm
  • Beam spot diameter at 250 mm (1/e²): < 50 µm
  • Laser Head Size: 20 x 112 mm
  • Operating voltage: 3.3 to 6 VDC
  • Unit Price: $1995.00
  • External access to optical feed back signal
  • Built-in safety feature shuts down laser in event power feedback control fails
  • Preset absolute peak output power of 250 µW for safety back up
  • Individually tested to guarantee proper operation within 19 - 50°C range
  • All parameters can be configured to specified values per end user requirement
    NEW Single longitudinal mode 532nM Laser Module
  • Transverse mode: TEMoo, M²<1.2 (typ.1.1)
  • Longitudinal Modes: Single longitudinal mode
  • Line width: < 0.00001 nM
  • Coherence length: >10 meter
  • Polarization linearity: >100:1, horizontal
  • Ellipticity: 0.95-1.05
  • Beam waist position: 22 mm behind the face
  • Beam diameter: <0.25 mm (Beam waist 0.07±0.007)
  • Beam divergence at full angle, 1/e², mrad: 10±1
  • Transverse beam position accuracy: ±0.3 mm
  • Beam alignment accuracy: ±3 mrad
  • Beam waist position accuracy: ±0.5 mm
  • Polarization orientation accuracy: ±3 °
  • Noise (10-20MHz): <0.5% RMS (typ. 0.1% RMS)
  • Long term stability: 2% / 8 hrs
  • Beam height to the laser head base: 0.669''
  • Warm-up time: <10 min (typ. 5 min)
  • Warm-up time from standby mode: 10 sec
  • Cable length: max. 1 meter
  • Connector type: IDC-24
  • Housing base temperature range: 15-50 °C
  • Heating power: <10 W (typ. 6 W)
  • Laser Head Size: 65 x 40 x 29 mm
  • Laser Head Weight: 150 g
  • Laser Driver Size: 85 x 60 x 25 mm
  • Iop: < 1.8 A
  • Vop: 4.5 to 6 VDC
  • Beam Divergence: 10±1 (mrad, full angle, 1/e²)
  • Beam Waist Diameter: 0.070±0.007 (mm, 1/e²)
  • Mounting plate thickness: 3/8''.
  • Single Longitudinal Diode_Pumped Green Laser Single Longitudinal Diode_Pumped Green Laser
    Item No. U/price Po (mW) max.
    GM32-5SL $3,795.00 5
    GM32-10SL $3,995.00 10
    GM32-20SL $4,195.00 20
    GM32-50SL $7,295.00 50

    Optional Beam Expander
    Beam Expander Fixtures
    Beam Expander
    Beam Expander with Laser
    Laser head with Beam Expander
    Item No. Unit Price Beam diameter at output, mm Beam divergence at full angle, 1/e², mrad
    O-E02-0.6 $129.00 1.1±0.1 0.6±0.1
    O-E02-0.45 $149.00 1.6±0.1 0.45±0.05
    O-E02-0.33 $149.00 2.2±0.2 0.33±0.05
    O-E02-1.8 $149.00 0.35±0.03 1.8±0.2
    O-E02-2.5 $149.00 0.25±0.02 2.5±0.2

    Single transverse mode 532nM Laser Module
    Please click on the Item No. for detail specifications
    Item No. U/price Stability (%) Po (mW) max. Iop (mA) Vop (DC) Beam Divergence (mrad, half angle) Beam Diameter (mm)
    GM32-1GA-3V $349.00 5 1 200 3 0.5 1.0
    GM32-1GA $369.00 5 1 200 5 0.5 1.0
    GM32-3GA-3V $395.00 5 3 250 3 0.5 1.0
    GM32-3GA $415.00 5 3 250 5 0.5 1.0
    GM32-5GA-3V $445.00 5 5 250 3 0.5 1.0
    GM32-5GA $465.00 5 5 250 5 0.5 1.0
    GM32-10GA $529.00 5 10 250 5 0.5 1.0
    GM32-15GA-3V $579.00 5 15 300 3 0.5 1.0
    GM32-15GA $589.00 5 15 300 5 0.5 1.0
    GM32-05GS $695.00 2 0.5 1400 3.3 to 3.5 < 0.6 < 1.0
    GM32-5GS $995.00 2 5 1400 3.3 to 3.5 < 0.6 < 1.0
    GM32-10GS $1,595.00 2 10 1400 3.3 to 3.5 < 0.6 < 1.0
    GM32-20GS $1,995.00 2 20 1400 3.3 to 3.5 < 0.6 < 1.0
    GM32-40GS $2,495.00 2 40 1400 3.3 to 3.5 < 0.6 < 1.0
    GM32-50GSA-P10 $1,695.00 5 50 3000 12 0.5 1.0
    GM32-100GSA-P10 $1,995.00 5 100 3000 12 0.5 1.0
    GM32-150GSA-P10 $2,495.00 5 150 3000 12 0.5 1.0
    GM32-200GSA-P10 $2,795.00 5 200 3000 12 0.5 1.0
    GM32-50GSA-P100 $1,895.00 5 50 3000 12 0.5 1.0
    GM32-100GSA-P100 $2,195.00 5 100 3000 12 0.5 1.0
    GM32-150GSA-P100 $2,595.00 5 150 3000 12 0.5 1.0
    GM32-200GSA-P100 $2,895.00 5 200 3000 12 0.5 1.0


    Item No.: GM32-1GA-3V
    Laser

    • Wavelength: 532 nM
    • Output Power: < 1 mW, CW, Class II
    • Transverse Mode: TEMoo
    • Power Stability: 5%
    • Beam Divergence (Half angle 1/e2): 0.5 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Size : Dia. 15.0 x 70.0 mm
    • Beam Position Adjustment
    • Single Unit Configuration (laser head and driver in one housing)
    • Operating Voltage / Current: 3.0 VDC / 200 mA
    • Operating Temperature Ranger: 15 - 35 °C
    • Optional Power Supply (Item No.: PS-3V3A): $49.00/ea.
    • Optional Laser Module Mount (Distance from center to mounting side: 13mm)

    Item No.: GM32-1GA
    Laser

    • Wavelength: 532 nM
    • Output Power: < 1 mW, CW, Class II
    • Transverse Mode: TEMoo
    • Power Stability: 5%
    • Beam Divergence (Half angle 1/e2): 0.5 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Size : Dia. 15.0 x 70.0 mm
    • Beam Position Adjustment
    • Single Unit Configuration (laser head and driver in one housing)
    • Operating Voltage / Current: 5.0 VDC / 200 mA
    • Operating Temperature Ranger: 15 - 35 °C
    • Modulation Control
    • Optional Power Supply (Item No.: PS-5V2A): $49.00/ea.
    • Optional Laser Module Mount (Distance from center to mounting side: 13mm)

    Item No.: GM32-3GA-3V
    Laser

    • Wavelength: 532 nM
    • Output Power: ~ 3 mW, CW, Class IIIa
    • Transverse Mode: TEMoo
    • Power Stability: 5%
    • Beam Divergence (Half angle 1/e2): 0.5 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Size : Dia. 15.0 x 70.0 mm
    • Beam Position Adjustment
    • Single Unit Configuration (laser head and driver in one housing)
    • Operating Voltage / Current: 3.0 VDC / 200 mA
    • Operating Temperature Ranger: 15 - 35 °C
    • Optional Power Supply (Item No.: PS-3V3A): $49.00/ea.
    • Optional Laser Module Mount (Distance from center to mounting side: 13mm)

    Item No.: GM32-3GA
    Laser

    • Wavelength: 532 nM
    • Output Power: ~ 3 mW, CW, Class IIIa
    • Transverse Mode: TEMoo
    • Power Stability: 5%
    • Beam Divergence (Half angle 1/e2): 0.5 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Size : Dia. 15.0 x 70.0 mm
    • Beam Position Adjustment
    • Single Unit Configuration (laser head and driver in one housing)
    • Operating Voltage / Current: 5.0 VDC / 200 mA
    • Operating Temperature Ranger: 15 - 35 °C
    • Modulation Control
    • Optional Power Supply (Item No.: PS-5V2A): $49.00/ea.
    • Optional Laser Module Mount (Distance from center to mounting side: 13mm)

    Item No.: GM32-5GA-3V
    Laser

    • Wavelength: 532 nM
    • Output Power: ~ 5 mW, CW, Class II
    • Transverse Mode: TEMoo
    • Power Stability: 5%
    • Beam Divergence (Half angle 1/e2): 0.5 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Size : Dia. 15.0 x 70.0 mm
    • Beam Position Adjustment
    • Single Unit Configuration (laser head and driver in one housing)
    • Operating Voltage / Current: 3.0 VDC / 300 mA
    • Operating Temperature Ranger: 15 - 35 °C
    • Optional Power Supply (Item No.: PS-3V3A): $49.00/ea.
    • Optional Laser Module Mount (Distance from center to mounting side: 13mm)

    Item No.: GM32-5GA
    Laser

    • Wavelength: 532 nM
    • Output Power: ~ 5 mW, CW, Class II
    • Transverse Mode: TEMoo
    • Power Stability: 5%
    • Beam Divergence (Half angle 1/e2): 0.5 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Size : Dia. 15.0 x 70.0 mm
    • Beam Position Adjustment
    • Single Unit Configuration (laser head and driver in one housing)
    • Operating Voltage / Current: 5.0 VDC / 300 mA
    • Operating Temperature Ranger: 15 - 35 °C
    • Modulation Control
    • Optional Power Supply (Item No.: PS-5V2A): $49.00/ea.
    • Optional Laser Module Mount (Distance from center to mounting side: 13mm)

    Item No.: GM32-10GA
    Laser

    • Wavelength: 532 nM
    • Output Power: < 10 mW, CW, Class IIIb
    • Transverse Mode: TEMoo
    • Power Stability: 5%
    • Beam Divergence (Half angle 1/e2): 0.5 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Size : Dia. 15.0 x 70.0 mm
    • Beam Position Adjustment
    • Single Unit Configuration (laser head and driver in one housing)
    • Operating Voltage / Current: 5.0 VDC / 300 mA
    • Operating Temperature Ranger: 15 - 35 °C
    • Modulation Control
    • Optional Power Supply (Item No.: PS-5V2A): $49.00/ea.
    • Optional Laser Module Mount (Distance from center to mounting side: 13mm)

    Item No.: GM32-15GA-3V
    Laser

    • Wavelength: 532 nM
    • Output Power: < 15 mW, CW, Class IIIb
    • Transverse Mode: TEMoo
    • Power Stability: 5%
    • Beam Divergence (Half angle 1/e2): 0.5 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Size : Dia. 15.0 x 70.0 mm
    • Beam Position Adjustment
    • Single Unit Configuration (laser head and driver in one housing)
    • Operating Voltage / Current: 3.0 VDC / 350 mA
    • Operating Temperature Ranger: 15 - 35 °C
    • Optional Power Supply (Item No.: PS-3V3A): $49.00/ea.
    • Optional Laser Module Mount (Distance from center to mounting side: 13mm)

    Item No.: GM32-15GA
    Laser

    • Wavelength: 532 nM
    • Output Power: < 15 mW, CW, Class IIIb
    • Transverse Mode: TEMoo
    • Power Stability: 5%
    • Beam Divergence (Half angle 1/e2): 0.5 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Size : Dia. 15.0 x 70.0 mm
    • Beam Position Adjustment
    • Single Unit Configuration (laser head and driver in one housing)
    • Operating Voltage / Current: 5.0 VDC / 350 mA
    • Operating Temperature Ranger: 15 - 35 °C
    • Modulation Control
    • Optional Power Supply (Item No.: PS-5V2A): $49.00/ea.
    • Optional Laser Module Mount (Distance from center to mounting side: 13mm)

    Item No.: GM32-05GS
    Laser

    • Wavelength: 532 nM
    • Output Power: 0.5 mW, CW, Class II
    • Transverse Mode: TEMoo
    • Power Stability at constant housing temperature: < 2% per 8 hrs
    • Power Stability at drifting housing temperature: < 5% per 10 °C
    • Beam Divergence (Half angle 1/e2): 0.6 ± 0.1mrad
    • Beam Diameter at output: %lt; 1.0 ± 0.2 mm
    • Polarization Linearity: > 50 : 1
    • Size : Dia. 14.8 x 112.0 mm
    • Cable length: 16 inches (40cm)
    • Operating Voltage / Current: 3.3 - 3.5 VDC / 1.4 A
    • Operating Temperature Ranger: 15 - 35 °C
    • Heating Power (at 3.3VDC): max. 4.6 W
    • Optional Power Supply (Item No.: PS-3V3A): $49.00/ea.
    • Optional Laser Module Mount (Distance from center to mounting side: 13mm)

    Item No.: GM32-5GS
    Laser

    • Wavelength: 532 nM
    • Output Power: 5 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability at constant housing temperature: < 2% per 8 hrs
    • Power Stability at drifting housing temperature: < 5% per 10 °C
    • Beam Divergence (Half angle 1/e2): 0.6 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Polarization Linearity: > 50 : 1
    • Size : Dia. 14.8 x 112.0 mm
    • Cable length: 16 inches (40cm)
    • Operating Voltage / Current: 3.3 - 3.5 VDC / 1.4 A
    • Operating Temperature Ranger: 15 - 35 °C
    • Heating Power (at 3.3VDC): max. 4.6 W
    • There are three 0.25''-20 mounting holes on laser head
    • Optional Power Supply (Item No.: PS-3V3A): $49.00/ea.
    • Optional Laser Module Mount (Distance from center to mounting side: 13mm)

    Item No.: GM32-10GS
    Laser and Driver
    Laser  Mounting holes

    • Wavelength: 532 nM
    • Output Power: 10 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability at constant housing temperature: < 2% per 8 hrs
    • Power Stability at drifting housing temperature: < 5% per 10 °C
    • Beam Divergence (Half angle 1/e2): 0.6 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Polarization Linearity: > 50 : 1
    • Size : Dia. .995 x 5.0 inches
    • Cable length: 16 inches (40cm)
    • Operating Voltage / Current: 3.3 - 3.5 VDC / 1.4 A
    • Operating Temperature Ranger: 15 - 35 °C
    • Heating Power (at 3.3VDC): max. 4.6 W
    • There are three 0.25''-20 mounting holes on laser head
    • Optional Power Supply (Item No.: PS-3V3A): $49.00/ea.
    • Distance from center to mounting side: 13mm

    Item No.: GM32-20GS
    Laser and Driver
    Laser  Mounting holes

    • Wavelength: 532 nM
    • Output Power: 20 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability at constant housing temperature: < 2% per 8 hrs
    • Power Stability at drifting housing temperature: < 5% per 10 °C
    • Beam Divergence (Half angle 1/e2): 0.6 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Polarization Linearity: > 50 : 1
    • Size : Dia. .995 x 5.0 inches
    • Cable length: 16 inches (40cm)
    • Operating Voltage / Current: 3.3 - 3.5 VDC / 1.4 A
    • Operating Temperature Ranger: 15 - 35 °C
    • Heating Power (at 3.3VDC): max. 4.6 W
    • There are three 0.25''-20 mounting holes on laser head
    • Optional Power Supply (Item No.: PS-3V3A): $49.00/ea.
    • Distance from center to mounting side: 13mm

    Item No.: GM32-40GS
    Laser
    Laser  Mounting holes

    • Wavelength: 532 nM
    • Output Power: 40 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability at constant housing temperature: < 2% per 8 hrs
    • Power Stability at drifting housing temperature: < 5% per 10 °C
    • Beam Divergence (Half angle 1/e2): 0.6 ± 0.1mrad
    • Beam Diameter at output: < 1.0 ± 0.2 mm
    • Polarization Linearity: > 50 : 1
    • Size : Dia. .995 x 5.0 inches
    • Cable length: 16 inches (40cm)
    • Operating Voltage / Current: 3.3 - 3.5 VDC / 1.4 A
    • Operating Temperature Ranger: 15 - 35 °C
    • Heating Power (at 3.3VDC): max. 4.6 W
    • There are three 0.25''-20 mounting holes on laser head
    • Optional Power Supply (Item No.: PS-3V3A): $49.00/ea.
    • Distance from center to mounting side: 13mm

    Item No.: GM32-50GSA-P10
    Laser and Driver

    • Wavelength: 532 nM
    • Output Power: 50 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability: < 5%
    • Line Width: 0.1 nm
    • Polarization Ratio: 10:1
    • Beam Divergence (Full angle 1/e2): 1.0 mrad (Optional 0.5 mrad)
    • Beam Diameter (1/e2): < 2.0 mm
    • Noise (RMS. 20 Hz - 20 MHz): 20 % around 50 - 200 KHz
    • Ellipticity: 0.95 -1.05
    • TTL Modulation Control (> 30 KHz)
    • Laser head size (W x L x H): 35 x 110 x 35 mm
    • Laser driver size(W x L x H): 72 x 105 x 30 mm
    • Cable length: 32 inches (81cm)
    • Operating Voltage / Current: 12 VDC / 3 A
    • Operating Temperature Ranger: 0 - 40 ° C
    • Optional Power Supply (Item No.: PS-12V3A): $59.00/ea.

    Item No.: GM32-100GSA-P10
    Laser and Driver

    • Wavelength: 532 nM
    • Output Power: 100 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability: < 5%
    • Line Width: 0.1 nm
    • Polarization Ratio: 10:1
    • Beam Divergence (Full angle 1/e2): 1.0 mrad (Optional 0.5 mrad)
    • Beam Diameter (1/e2): < 2.0 mm
    • Noise (RMS. 20 Hz - 20 MHz): 20 % around 50 - 200 KHz
    • Ellipticity: 0.95 -1.05
    • TTL Modulation Control (> 30 KHz)
    • Laser head size (L x W x H): 135 x 50 x 42 mm
    • Laser driver size(L x W x H): 105 x 72 x 30 mm
    • Cable length: 32 inches (81cm)
    • Operating Voltage / Current: 12 VDC / 3 A
    • Operating Temperature Ranger: 0 - 40 ° C
    • Optional Power Supply (Item No.: PS-12V3A): $59.00/ea.

    Item No.: GM32-150GSA-P10
    Laser and Driver

    • Wavelength: 532 nM
    • Output Power: 150 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability: < 5%
    • Line Width: 0.1 nm
    • Polarization Ratio: 10:1
    • Beam Divergence (Full angle 1/e2): 1.0 mrad (Optional 0.5 mrad)
    • Beam Diameter (1/e2): < 2.0 mm
    • Noise (RMS. 20 Hz - 20 MHz): 20 % around 50 - 200 KHz
    • Ellipticity: 0.95 -1.05
    • TTL Modulation Control (> 30 KHz)
    • Laser head size (L x W x H): 135 x 50 x 42 mm
    • Laser driver size(L x W x H): 150 x 62 x 38 mm
    • Cable length: 32 inches (81cm)
    • Operating Voltage / Current: 12 VDC / 3 A
    • Operating Temperature Ranger: 0 - 40 ° C
    • Optional Power Supply (Item No.: PS-12V3A): $59.00/ea.

    Item No.: GM32-200GSA-P10
    Laser and Driver

    • Wavelength: 532 nM
    • Output Power: 200 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability: < 5%
    • Line Width: 0.1 nm
    • Polarization Ratio: 10:1
    • Beam Divergence (Full angle 1/e2): 1.0 mrad (Optional 0.5 mrad)
    • Beam Diameter (1/e2): < 2.0 mm
    • Noise (RMS. 20 Hz - 20 MHz): 20 % around 50 - 200 KHz
    • Ellipticity: 0.95 -1.05
    • TTL Modulation Control (> 30 KHz)
    • Laser head size (L x W x H): 135 x 50 x 42 mm
    • Laser driver size(L x W x H): 150 x 62 x 38 mm
    • Cable length: 32 inches (81cm)
    • Operating Voltage / Current: 12 VDC / 3 A
    • Operating Temperature Ranger: 0 - 40 ° C
    • Optional Power Supply (Item No.: PS-12V3A): $59.00/ea.

    Item No.: GM32-50GSA-P100
    Laser and Driver

    • Wavelength: 532 nM
    • Output Power: 50 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability: < 5%
    • Line Width: 0.1 nm
    • Polarization Ratio: 100:1
    • Beam Divergence (Full angle 1/e2): 1.0 mrad (Optional 0.5 mrad)
    • Beam Diameter (1/e2): < 2.0 mm
    • Noise (RMS. 20 Hz - 20 MHz): 20 % around 50 - 200 KHz
    • Ellipticity: 0.95 -1.05
    • TTL Modulation Control (> 30 KHz)
    • Laser head size (W x L x H): 35 x 110 x 35 mm
    • Laser driver size(W x L x H): 72 x 105 x 30 mm
    • Cable length: 32 inches (81cm)
    • Operating Voltage / Current: 12 VDC / 3 A
    • Operating Temperature Ranger: 0 - 40 ° C
    • Optional Power Supply (Item No.: PS-12V3A): $59.00/ea.

    Item No.: GM32-100GSA-P100
    Laser and Driver

    • Wavelength: 532 nM
    • Output Power: 100 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability: < 5%
    • Line Width: 0.1 nm
    • Polarization Ratio: 100:1
    • Beam Divergence (Full angle 1/e2): 1.0 mrad (Optional 0.5 mrad)
    • Beam Diameter (1/e2): < 2.0 mm
    • Noise (RMS. 20 Hz - 20 MHz): 20 % around 50 - 200 KHz
    • Ellipticity: 0.95 -1.05
    • TTL Modulation Control (> 30 KHz)
    • Laser head size (L x W x H): 135 x 50 x 42 mm
    • Laser driver size(L x W x H): 105 x 72 x 30 mm
    • Cable length: 32 inches (81cm)
    • Operating Voltage / Current: 12 VDC / 3 A
    • Operating Temperature Ranger: 0 - 40 ° C
    • Optional Power Supply (Item No.: PS-12V3A): $59.00/ea.

    Item No.: GM32-150GSA-P100
    Laser and Driver

    • Wavelength: 532 nM
    • Output Power: 150 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability: < 5%
    • Line Width: 0.1 nm
    • Polarization Ratio: 100:1
    • Beam Divergence (Full angle 1/e2): 1.0 mrad (Optional 0.5 mrad)
    • Beam Diameter (1/e2): < 2.0 mm
    • Noise (RMS. 20 Hz - 20 MHz): 20 % around 50 - 200 KHz
    • Ellipticity: 0.95 -1.05
    • TTL Modulation Control (> 30 KHz)
    • Laser head size (L x W x H): 135 x 50 x 42 mm
    • Laser driver size(L x W x H): 150 x 62 x 38 mm
    • Cable length: 32 inches (81cm)
    • Operating Voltage / Current: 12 VDC / 3 A
    • Operating Temperature Ranger: 0 - 40 ° C
    • Optional Power Supply (Item No.: PS-12V3A): $59.00/ea.

    Item No.: GM32-200GSA-P100
    Laser and Driver

    • Wavelength: 532 nM
    • Output Power: 200 mW, CW
    • Transverse Mode: TEMoo
    • Power Stability: < 5%
    • Line Width: 0.1 nm
    • Polarization Ratio: 100:1
    • Beam Divergence (Full angle 1/e2): 1.0 mrad (Optional 0.5 mrad)
    • Beam Diameter (1/e2): < 2.0 mm
    • Noise (RMS. 20 Hz - 20 MHz): 20 % around 50 - 200 KHz
    • Ellipticity: 0.95 -1.05
    • TTL Modulation Control (> 30 KHz)
    • Laser head size (L x W x H): 135 x 50 x 42 mm
    • Laser driver size(L x W x H): 150 x 62 x 38 mm
    • Cable length: 32 inches (81cm)
    • Operating Voltage / Current: 12 VDC / 3 A
    • Operating Temperature Ranger: 0 - 40 ° C
    • Optional Power Supply (Item No.: PS-12V3A): $59.00/ea.

    All specifications are subject to change without notice.
    Prices are FOB Minden, NV (USA) and subject to change without notice.

    MeshTel INTELITE, INC. info@meshtel.com

    Tel:(775) 267-5959, Fax:(775) 267-5958.


    What's New |  Hot Buy's |  Quotation |  Place Order |  About Us |  Legal

    © 1996 - 2014 MeshTel INTELITE INC.