DPSS Green 527nM, 532nM Laser System

Diode / DPSS Laser
IR Laser System

      Mounting Option
Mounting option

DPSS Laser System
Green Laser System		 Fiber Coupling System
Fiber Coupling System

  • CW, Q-switched, AOM Q-switched
  • 527nM, 532nM / Single Longitudinal Mode
  • Low Noise (< 1% - 0 to 20MHz)
  • TEMoo ~95%
  • Internal Temprature Stablizer
  • Stable Output Power
  • On/Off Key Lock Switch
  • Function Panel Display
  • Optional Fiber Coupling
  • CDRH Complied
    Heat Sink Fan
    		•

    Single Longitudinal, Low Noise ( < 1% , 0 to 20MHz) CW Laser System
    Item No. U/price Po (mW) Max. Beam Diameter (mm) Beam Divergence (mrad, full angle) Long Term Stability
    GSLN32-50 $8995.00 50 1.5 0.8 < 2% / 8hrs
    GSLN32-20 $7995.00 20 1.5 0.8 < 2% / 8hrs
    FGSLN32-50-SMPM-FC $12,995.00 50 1.5 0.8 < 2% / 8hrs

    AOM (High Speed Q-switched via Acousto-Optic Modulator) Laser System
    Item No. U/price l (nm) Pulse Energy (at 1KHz) Pulse Duration (at 1KHz) Max. Pulse Repetition Rate Average Output Power
    GSQAOM27-60 $14995.00 527 60 µJ < 6 nsec 10 KHz --
    GSQAOM27-100 $18995.00 527 100 µJ < 6 nsec 10 KHz ---
    GSQAOM32-25 $11995.00 532 25 µJ < 10 nsec 10 KHz > 40mW

    CW Laser System
    Item No. U/price l (nm) Po (mW) Max. Beam Diameter (mm) Beam Divergence (mrad) Stability
    GS32-5 $895.00 532 5 1.0 1.2 15%
    GS32-10 $1095.00 532 10 1.0 1.2 15%
    GS32-20 $1495.00 532 20 1.0 1.2 15%
    GSF32-5P $1995.00 532 5 1.0 1.2 2%
    GSF32-10P $2195.00 532 10 1.0 1.2 2%
    GSF32-20P $2795.00 532 20 1.0 1.2 2%
    GSF32-50PS $2495.00 532 50 1.5 0.8 5%
    GSF32-100PS $2795.00 532 100 1.0 1.2 5%
    GSF32-150PS $2995.00 532 150 1.0 1.2 10%
    GSF32-200PS $3495.00 532 200 1.5 1.2 10%
    GSF27-200P $7950.00 527 200 0.8 1.0 2%
    GSF32-300PS $4595.00 532 300 1.5 1.2 10%
    GSF27-350P $9950.00 527 350 0.8 1.0 2%
    GSF27-500P $12950.00 527 500 1.6 1.0 2%
    GSF32-1000PS $9995.00 532 1000 1.5 1.2 10%
    GSF27-1000P $13950.00 527 1000 0.8 1.0 2%
    GSF27-1500P $14950.00 527 1500 0.8 1.0 2%

    Item No.: GSLN32-50

    CW Laser
    CW Laser System
    power supply
    DC Driver/Controller

    • CW, Single Longitudinal Mode
    • Wavelength: 532 nM
    • Output Power: 50 mW
    • Transverse Mode: TEMoo, M2 < 1.2 (typ.1.05)
    • Noise (10Hz - 20 MHz): < 0.5 RMS (typ. 0.1% RMS)
    • Line Width: < 0.00001 nm
    • Beam Divergence (Full angle 1/e2): 0.6 mrad
    • Beam Diameter at outpout: 1.1 mm
    • Coherence Length: > 50 M
    • Ellipticity: 0.95 -1.05
    • Beam Pointing Stability: < 0.05 mrad
    • Laser head size: 50 x 90 x 190 mm
    • Power Stability: < 2%
    • Heating Power: < 15 W (typ. 8 W)
    • Housing base temperature range: 15 - 45 °C
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Function panel display
    • Optional Heat Sink / Fan: $195.00
    • Adjustable output power via digital controller with 1 mW resolution
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply. (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115±20% VAC - 230±15% VAC / 50 -60Hz (selectable)

    Item No.: GSLN32-20

    CW Laser
    CW Laser System
    power supply
    DC Driver/Controller

    • CW, Single Longitudinal Mode
    • Wavelength: 532 nM
    • Output Power: 20 mW
    • Transverse Mode: TEMoo, M2 < 1.2 (typ.1.05)
    • Noise (10Hz - 20 MHz): < 0.5 RMS (typ. 0.1% RMS)
    • Line Width: < 0.00001 nm
    • Beam Divergence (Full angle 1/e2): 0.6 mrad
    • Beam Diameter at outpout: 1.1 mm
    • Coherence Length: > 50 M
    • Ellipticity: 0.95 -1.05
    • Beam Pointing Stability: < 0.05 mrad
    • Laser head size: 50 x 90 x 190 mm
    • Power Stability: < 2%
    • Heating Power: < 15 W (typ. 8 W)
    • Housing base temperature range: 15 - 45 °C
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Function panel display
    • Optional Heat Sink / Fan: $195.00
    • Adjustable output power via digital controller with 1 mW resolution
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply. (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115±20% VAC - 230±15% VAC / 50 -60Hz (selectable)
    • Optional Heat Sink / Fan: $195.00

    Item No.: GSQAOM27-60

    AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
    AOM Q-switched System
    Heat Sink Fan

    • Q-Switched with AOM, ext./int. triggering/thru RS-232
    • Wavelength: 527 nM
    • Max. value of average pulse energy at 0.01 - 1 KHz: 60 µJ ±15%
    • Max. value of average pulse energy at the range single pulse - 0.01 KHz: 60 µJ ±25%
    • Max .value of average output power (typ. at 3 KHz): ≷ 100 mW
    • Pulse repetition rate:
      • ext. triggering: single pulse - 30 KHz*
      • int. triggering: 0.01 - 30 KHz (thru RS-232**)
      • int. triggering: 1 KHz (without PC***)
    • Pulse Duration at 0.01 - 1 KHz, average pulse energy 80%, FWHM: 7±3 ns
    • Pulse-to pulse stability (StDev/Mean at 0.01 - 1 KHz): < 7%
    • Beam Profile: Gaussian, TEMoo
    • Beam Divergence (Full angle 1/e2): 0.7±0.4 mrad
    • Beam Diameter (1/e2 at output aperture): 2.0±0.6 mm
    • Polarization: linear > 100:1, Horizontal (±5°)
    • Laser Trigger to Sync Out Pulse**** (at 0.01 - 1 KHz, Average pulse energy 80%)
      • Delay: 300±250 ns
      • Jitter: < 8 ns
    • Laser Edmission to Sync Out Pulse**** (at 0.01 - 1 KHz, Average pulse energy 80%)
      • Delay: < 50 ns
      • Jitter: < 2 ns
    • Laser head size: 55 x 90 x 311mm
    • Laser head with heatsink size: 90 x 122 x 311mm
    • Laser driver size: 43 x 93 x 150 mm
    • Laser driver with heatsink size: 93 x 110 x 150 mm
    • Operating Voltage
      • with AC/DC adapter: 90 - 264 VAC
      • without AC/DC adapter: 12±10% VDC
    • Current Comsumption: < 6 A
    • *Triggering with external electric pulse generator; generator is not included in delivery set.
    • **Generation of periodical laser pulses using PC, step 0.01 kHz. Average energy may be changed by software from 10% up to maximum value.
    • ***Generation of periodical laser pulses at 1 kHz rep. rate; external generator and/or PC are not needed.
    • ****Sync Out signal is generated by pulse of laser light.
    • Without AC/DC adapter AS-120P-12 (12 VDC).

    Item No.: GSQAOM27-100

    AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
    AOM Q-switched System
    Heat Sink Fan

    • Q-Switched with AOM, ext./int. triggering/thru RS-232
    • Wavelength: 527 nM
    • Max. value of average pulse energy at 0.01 - 1 KHz: 100 µJ ±15%
    • Max. value of average pulse energy at the range single pulse - 0.01 KHz: 100 µJ ±25%
    • Max .value of average output power (typ. at 3 KHz): ≷ 170 mW
    • Pulse repetition rate:
      • ext. triggering: single pulse - 30 KHz*
      • int. triggering: 0.01 - 30 KHz (thru RS-232**)
      • int. triggering: 1 KHz (without PC***)
    • Pulse Duration at 0.01 - 1 KHz, average pulse energy 80%, FWHM: 7±3 ns
    • Pulse-to pulse stability (StDev/Mean at 0.01 - 1 KHz): < 6%
    • Beam Profile: Gaussian, TEMoo
    • Beam Divergence (Full angle 1/e2): 0.7±0.4 mrad
    • Beam Diameter (1/e2 at output aperture): 2.0±0.6 mm
    • Polarization: linear > 100:1, Horizontal (±5°)
    • Laser Trigger to Sync Out Pulse**** (at 0.01 - 1 KHz, Average pulse energy 80%)
      • Delay: 300±250 ns
      • Jitter: < 8 ns
    • Laser Edmission to Sync Out Pulse**** (at 0.01 - 1 KHz, Average pulse energy 80%)
      • Delay: < 50 ns
      • Jitter: < 2 ns
    • Laser head size: 55 x 90 x 311mm
    • Laser head with heatsink size: 90 x 122 x 311mm
    • Laser driver size: 43 x 93 x 150 mm
    • Laser driver with heatsink size: 93 x 110 x 150 mm
    • Operating Voltage
      • with AC/DC adapter: 90 - 264 VAC
      • without AC/DC adapter: 12±10% VDC
    • Current Comsumption: < 6 A
    • *Triggering with external electric pulse generator; generator is not included in delivery set.
    • **Generation of periodical laser pulses using PC, step 0.01 kHz. Average energy may be changed by software from 10% up to maximum value.
    • ***Generation of periodical laser pulses at 1 kHz rep. rate; external generator and/or PC are not needed.
    • ****Sync Out signal is generated by pulse of laser light.
    • Without AC/DC adapter AS-120P-12 (12 VDC).

    Item No.: GSQAOM32-25

    AOM - High Speed Q-Switched
    Acousto-Optic Modulator Laser

    AOM Q-switched System

    • Q-Switched with AOM, ext./int. triggering through RS-232
    • Wavelength: 532 nM
    • Average Pulse energy at 0.01 to 1 KHz: > 25 µJ±15%
    • Average Pulse energy at the range single pulse - 0.01 kHz: > 25 µJ±25%
    • Average Output Power (at 3 KHz): > 40 mW
    • Pulse repetition rate:
      • external triggering: 10 KHz
      • internal triggering thru RS-232: 0.01 - 10 KHz
    • Pulse Duration at 0.01 to 1 KHz Average Pulse energy > 20 µJ, FWHM: 7±3 ns
    • Pulse-to-pulse Stability - StDev/Mean (at 0.01 - 1KHz): < 8% (typ. < 6%)
    • Beam profile: Gaussian, TEMoo
    • Beam Divergence (Half angle 1/e2): 1.5 mrad
    • Beam Diameter: 0.4 mm
    • Polarization: linear > 100:1, Horizontal
    • Laser head size, weight: 299 x 90 x 55mm / < 2.0 Kg
    • Laser Head with heat sink size, weight: 299 x 122 x 90mm / < 3.0 Kg
    • Laser Driver Power Supply size, weight: 150 x 43 x 93mm / < 1.6 Kg
    • Laser Driver Power Supply with heat sink size, weight: 150 x 110 x 93mm / < 2.6 Kg
    • Operating Voltage (with AC/DC adapter): 90 - 264 VAC (included)
    • Operating Voltage (without AC/DC adapter) 12±10% VDC

    Item No.: GS32-5

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 532 nM
    • Output Power: 5 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.0 mm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 15%
    • Output power adjustable: additional $95.00/ea
    • Modulation Control (up to 5K): additional $95.00/ea
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Output: 5VDC, Max. 1,6A

    Item No.: GS32-10

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 532 nM
    • Output Power: 10 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.0 mm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 15%
    • Output power adjustable: additional $95.00/ea
    • Modulation Control (up to 5K): additional $95.00/ea
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Output: 5VDC, Max. 1,6A

    Item No.: GS32-20

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 532 nM
    • Output Power: 20 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.0 mm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 15%
    • Output power adjustable: additional $95.00/ea
    • Modulation Control (up to 5K): additional $95.00/ea
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Output: 5VDC, Max. 1,6A

    Item No.: GSF32-5P

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 532 nM
    • Output Power: 5 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.0 mm
    • Line Width: < 0.2 nm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Output: 5VDC, Max. 1,6A

    Item No.: GSF32-10P

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 532 nM
    • Output Power: 10 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.0 mm
    • Line Width: < 0.2 nm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Output: 5VDC, Max. 1,6A

    Item No.: GSF32-20P

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 532 nM
    • Output Power: 20 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.0 mm
    • Line Width: < 0.2 nm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Output: 5VDC, Max. 1,6A

    Item No.: GS32-50

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 532 nM
    • Output Power: 50 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.0 mm
    • Laser head size: 45 x 95 x 130 mm
    • Power Stability: < 5%
    • Modulation Control (up to 5K)
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.4 A
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Output: 5VDC, Max. 1,6A

    Item No.: GS32-100

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 532 nM
    • Output Power: 100 mW
    • Beam Divergence (Half angle 1/e2): 0.6mrad
    • Beam Diameter: 1.0mm
    • Laser head size: 45 x 95 x 130 mm
    • Power Stability: < 15%
    • Output power adjustable: additional $95.00/ea
    • Modulation Control (up to 5K): additional $95.00/ea
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.4 A
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: GS32-150

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 532 nM
    • Output Power: 150 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.0 mm
    • Laser head size: 45 x 95 x 130 mm
    • Power Stability: < 15%
    • Output power adjustable: additional $95.00/ea
    • Modulation Control (up to 5K): additional $95.00/ea
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.4 A
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Output: 5VDC, Max. 1,6A

    Item No.: GSF32-50PS

    CW Laser
    CW Laser System

    • CW
    • Wavelength: 532 nM
    • Output Power: 50 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.05 mrad
    • Power Stability: < 10%
    • Laser head size: 50 x 50 x 125 mm
    • Laser Driver Size: 170 x 160 x 110 mm
    • Function panel display
    • Adjustable output power
    • Analog / Digital Modulation Control: 30 KHz
    • Operating Voltage: 80 - 265VAC/ 50 -60Hz

    Item No.: GSF32-100PS

    CW Laser
    CW Laser System

    • CW
    • Wavelength: 532 nM
    • Output Power: 100 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.05 mrad
    • Power Stability: < 10%
    • Laser head size: 50 x 50 x 125 mm
    • Laser Driver Size: 170 x 160 x 110 mm
    • Function panel display
    • Adjustable output power
    • Analog / Digital Modulation Control: 30 KHz
    • Operating Voltage: 80 - 265VAC/ 50 -60Hz

    Item No.: GSF32-150PS

    CW Laser
    CW Laser System

    • CW
    • Wavelength: 532 nM
    • Output Power: 150 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.05 mrad
    • Power Stability: < 10%
    • Laser head size: 50 x 50 x 125 mm
    • Laser Driver Size: 170 x 160 x 110 mm
    • Function panel display
    • Adjustable output power
    • Analog / Digital Modulation Control: 30 KHz
    • Operating Voltage: 80 - 265VAC/ 50 -60Hz

    Item No.: GSF32-200PS

    CW Laser
    CW Laser System

    • CW
    • Wavelength: 532 nM
    • Output Power: 200 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.05 mrad
    • Power Stability: < 10%
    • Laser head size: 50 x 50 x 125 mm
    • Laser Driver Size: 170 x 160 x 110 mm
    • Function panel display
    • Adjustable output power
    • Analog / Digital Modulation Control: 30 KHz
    • Operating Voltage: 80 - 265VAC/ 50 -60Hz

    Item No.: GSF27-200P

    CW Laser
    CW Laser System

    • CW
    • Wavelength: 527 nM
    • Output Power: 200 mW
    • Output Power Stability (Over 8 hours): < 2% peak-to-peak (< 0.5% RMS)
    • Optical Noise (RMS, 10 Hz - 20 MHz): < 1% RMS
    • Output Power Adjustment: 7.5 mW - 100%
    • Spectrum Linewidth (FWHM), typ: 4.5
    • Beam Diameter at output: 0.8 ± 0.1 mm
    • Beam Divergence (full angle 1/e2): < 1.0 mrad
    • Beam Static Alignment Tolerance, mm: < 0.5
    • Beam Angular Alignment Tolerance, mrad: < 5.0
    • Beam Pointing Stability: < 5 µrad per hour at constant Temperature, < 9µrad per °C
    • Beam Profile: TEMoo
    • Beam Quality M2: < 1.1
    • Beam Ellipcity: < 1.11 : 1
    • Polarization: linear > 200:1, Horizontal (< 2°)
    • Operating Temperature/Humidity Range: 15 - 40°C, up to 80% humidity non-condensing
    • Warm-up time: < 5 min
    • PC control: via RS-232
    • Start-up (from stand-by mode): 4 sec
    • Frequency of Exchange via RS-232 interface: 4800 b per second
    • Laser head: 241 x 90 x 55
    • Laser head with heat sink fan: 241 x 90 x 122
    • Power Supply driver (with key): 190 x 91 (115) x 27
    • Power Supplt driver with heat sink (with key): 203 x 96 (121) x 94
    • Laser head weigth: < 1.6 Kg
    • Power Supply Driver weight: < 0.6 Kg
    • Operating Voltage without AC/DC adapter: 10.8 - 13.2 VDC
    • Operating Voltage with AC/DC adapter: 90 - 264 VAC
    • Total Power Consumption (typ/max): < 30 / 60
    • Current Consumption (typ/max): < 2.5 / 5
    • Laser Class: IIIb
    • Compliance: RoHS, CDRH, CE

    Item No.: GSF27-350P

    CW Laser
    CW Laser System

    • CW
    • Wavelength: 527 nM
    • Output Power: 350 mW
    • Output Power Stability (Over 8 hours): < 2% peak-to-peak (< 0.5% RMS)
    • Optical Noise (RMS, 10 Hz - 20 MHz): < 1% RMS
    • Output Power Adjustment: 4.5 mW - 100%
    • Spectrum Linewidth (FWHM), typ: 4.5
    • Beam Diameter at output: 0.8 ± 0.1 mm
    • Beam Divergence (full angle 1/e2): < 1.0 mrad
    • Beam Static Alignment Tolerance, mm: < 0.5
    • Beam Angular Alignment Tolerance, mrad: < 5.0
    • Beam Pointing Stability: < 5 µrad per hour at constant Temperature, < 9µrad per °C
    • Beam Profile: TEMoo
    • Beam Quality M2: < 1.1
    • Beam Ellipcity: < 1.11 : 1
    • Polarization: linear > 200:1, Horizontal (< 2°)
    • Operating Temperature/Humidity Range: 15 - 40°C, up to 80% humidity non-condensing
    • Warm-up time: < 5 min
    • PC control: via RS-232
    • Start-up (from stand-by mode): 4 sec
    • Frequency of Exchange via RS-232 interface: 4800 b per second
    • Laser head: 241 x 90 x 55mm
    • Laser head with heat sink fan: 241 x 90 x 122mm
    • Power Supply driver (with key): 190 x 91 (115) x 27mm
    • Power Supplt driver with heat sink (with key): 203 x 96 (121) x 94mm
    • Laser head weight: < 1.6 Kg
    • Power Supply Driver weight: < 0.6 Kg
    • Operating Voltage without AC/DC adapter: 10.8 - 13.2 VDC
    • Operating Voltage with AC/DC adapter: 90 - 264 VAC
    • Total Power Consumption (typ/max): < 30 / 60
    • Current Consumption (typ/max): < 2.5 / 5
    • Laser Class: IIIb
    • Compliance: RoHS, CDRH, CE

    Item No.: GSF27-500P

    CW Laser
    CW Laser System

    • CW
    • Wavelength: 527 nM
    • Output Power: 500 mW
    • Output Power Stability (Over 8 hours): < 2% peak-to-peak (< 0.5% RMS)
    • Optical Noise (RMS, 10 Hz - 20 MHz): < 1% RMS
    • Output Power Adjustment: 3.0 mW - 100%
    • Spectrum Linewidth (FWHM), typ: 4.5
    • Beam Diameter at output: 0.8 ± 0.1 mm
    • Beam Divergence (full angle 1/e2): < 1.0 mrad
    • Beam Static Alignment Tolerance, mm: < 0.5
    • Beam Angular Alignment Tolerance, mrad: < 5.0
    • Beam Pointing Stability: < 5 µrad per hour at constant Temperature, < 9µrad per °C
    • Beam Profile: TEMoo
    • Beam Quality M2: < 1.1
    • Beam Ellipcity: < 1.11 : 1
    • Polarization: linear > 200:1, Horizontal (< 2°)
    • Operating Temperature/Humidity Range: 15 - 40°C, up to 80% humidity non-condensing
    • Warm-up time: < 5 min
    • PC control: via RS-232
    • Start-up (from stand-by mode): 4 sec
    • Frequency of Exchange via RS-232 interface: 4800 b per second
    • Laser head: 241 x 90 x 55mm
    • Laser head with heat sink fan: 241 x 90 x 122mm
    • Power Supply driver (with key): 190 x 91 (115) x 27mm
    • Power Supplt driver with heat sink (with key): 203 x 96 (121) x 94mm
    • Laser head weight: < 1.6 Kg
    • Power Supply Driver weight: < 0.6 Kg
    • Operating Voltage without AC/DC adapter: 10.8 - 13.2 VDC
    • Operating Voltage with AC/DC adapter: 90 - 264 VAC
    • Total Power Consumption (typ/max): < 35 / 65
    • Current Consumption (typ/max): < 2.9 / 5.4
    • Laser Class: IV
    • Compliance: RoHS, CDRH, CE

    Item No.: GSF27-1000P

    CW Laser
    CW Laser System

    • CW
    • Wavelength: 527 nM
    • Output Power: 1000 mW
    • Output Power Stability (Over 8 hours): < 2% peak-to-peak (< 0.5% RMS)
    • Optical Noise (RMS, 10 Hz - 20 MHz): < 1% RMS
    • Output Power Adjustment: 1.5 mW - 100%
    • Spectrum Linewidth (FWHM), typ: 4.5
    • Beam Diameter at output: 0.8 ± 0.1 mm
    • Beam Divergence (full angle 1/e2): < 1.0 mrad
    • Beam Static Alignment Tolerance, mm: < 0.5
    • Beam Angular Alignment Tolerance, mrad: < 5.0
    • Beam Pointing Stability: < 5 µrad per hour at constant Temperature, < 9µrad per °C
    • Beam Profile: TEMoo
    • Beam Quality M2: < 1.1
    • Beam Ellipcity: < 1.11 : 1
    • Polarization: linear > 200:1, Horizontal (< 2°)
    • Operating Temperature/Humidity Range: 15 - 40°C, up to 80% humidity non-condensing
    • Warm-up time: < 5 min
    • PC control: via RS-232
    • Start-up (from stand-by mode): 4 sec
    • Frequency of Exchange via RS-232 interface: 4800 b per second
    • Laser head: 241 x 90 x 55mm
    • Laser head with heat sink fan: 241 x 90 x 122mm
    • Power Supply driver (with key): 190 x 91 (115) x 27mm
    • Power Supplt driver with heat sink (with key): 203 x 96 (121) x 94mm
    • Laser head weight: < 1.6 Kg
    • Power Supply Driver weight: < 0.6 Kg
    • Operating Voltage without AC/DC adapter: 10.8 - 13.2 VDC
    • Operating Voltage with AC/DC adapter: 90 - 264 VAC
    • Total Power Consumption (typ/max): < 35 / 65
    • Current Consumption (typ/max): < 2.9 / 5.4
    • Laser Class: IV
    • Compliance: RoHS, CDRH, CE

    Item No.: GSF27-1500P

    CW Laser
    CW Laser System

    • CW
    • Wavelength: 527 nM
    • Output Power: 1500 mW
    • Output Power Stability (Over 8 hours): < 2% peak-to-peak (< 0.5% RMS)
    • Optical Noise (RMS, 10 Hz - 20 MHz): < 1% RMS
    • Output Power Adjustment: 1.0 mW - 100%
    • Spectrum Linewidth (FWHM), typ: 4.5
    • Beam Diameter at output: 0.8 ± 0.1 mm
    • Beam Divergence (full angle 1/e2): < 1.0 mrad
    • Beam Static Alignment Tolerance, mm: < 0.5
    • Beam Angular Alignment Tolerance, mrad: < 5.0
    • Beam Pointing Stability: < 5 µrad per hour at constant Temperature, < 9µrad per °C
    • Beam Profile: TEMoo
    • Beam Quality M2: < 1.1
    • Beam Ellipcity: < 1.11 : 1
    • Polarization: linear > 200:1, Horizontal (< 2°)
    • Operating Temperature/Humidity Range: 15 - 40°C, up to 80% humidity non-condensing
    • Warm-up time: < 5 min
    • PC control: via RS-232
    • Start-up (from stand-by mode): 4 sec
    • Frequency of Exchange via RS-232 interface: 4800 b per second
    • Laser head: 241 x 90 x 55mm
    • Laser head with heat sink fan: 241 x 90 x 122mm
    • Power Supply driver (with key): 190 x 91 (115) x 27mm
    • Power Supplt driver with heat sink (with key): 203 x 96 (121) x 94mm
    • Laser head weight: < 1.6 Kg
    • Power Supply Driver weight: < 0.6 Kg
    • Operating Voltage without AC/DC adapter: 10.8 - 13.2 VDC
    • Operating Voltage with AC/DC adapter: 90 - 264 VAC
    • Total Power Consumption (typ/max): < 35 / 65
    • Current Consumption (typ/max): < 2.9 / 5.4
    • Laser Class: IV
    • Compliance: RoHS, CDRH, CE

    Item No.: GSF32-300PS

    CW Laser
    CW Laser System

    • CW
    • Wavelength: 532 nM
    • Output Power: 300 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.05 mrad
    • Power Stability: < 10%
    • Laser head size: 50 x 50 x 125 mm
    • Laser Driver Size: 170 x 160 x 110 mm
    • Function panel display
    • Adjustable output power
    • Analog / Digital Modulation Control: 30 KHz
    • Operating Voltage: 80 - 265VAC/ 50 -60Hz

    Item No.: GSF32-1000PS

    CW Laser
    CW Laser System

    • CW
    • Wavelength: 532 nM
    • Output Power: 1000 mW
    • Beam Divergence (Half angle 1/e2): 0.6 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.05 mrad
    • Power Stability: < 10%
    • Laser head size: 50 x 50 x 125 mm
    • Laser Driver Size: 170 x 160 x 110 mm
    • Function panel display
    • Adjustable output power
    • Analog / Digital Modulation Control: 30 KHz
    • Operating Voltage: 80 - 265VAC/ 50 -60Hz

    Item No.: GSF32-300P

    CW Laser
    CW Laser System
    power supply
    DC Driver

    • CW
    • Wavelength: 532 nM
    • Output Power: 300 mW
    • Beam Divergence (Half angle 1/e2): 0.4 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.05 mrad
    • Power Stability: < 2%
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Laser head size: 46 x 90 x 225mm
    • Function panel display
    • Adjustable output power via digital controller with 1 mW resolution
    • Optional Analog / Digital Modulation Control: 50 - 1000 Hz: $495.00
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply. (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115±20% VAC - 230±15% VAC / 50 -60Hz (selectable)

    • Optional DC Driven Laser Driver/Controller
    • Size: 44 x 65 x 173 mm
    • Input Voltage: 12 VDC, < 100W

    Item No.: GSF32-400P

    CW Laser
    CW Laser System
    power supply
    DC Driver

    • CW
    • Wavelength: 532 nM
    • Output Power: 400 mW
    • Beam Divergence (Half angle 1/e2): 0.4 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.05 mrad
    • Power Stability: < 2%
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Laser head size: 46 x 90 x 225mm
    • Function panel display
    • Adjustable output power via digital controller with 1 mW resolution
    • Optional Analog / Digital Modulation Control: 50 - 1000 Hz: $495.00
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply. (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115±20% VAC - 230±15% VAC / 50 -60Hz (selectable)

    • Optional DC Driven Laser Driver/Controller
    • Size: 44 x 65 x 173 mm
    • Input Voltage: 12 VDC, < 100W

    Item No.: GSF32-500P

    CW Laser
    CW Laser System
    power supply
    DC Driver

    • CW
    • Wavelength: 532 nM
    • Output Power: 500 mW
    • Beam Divergence (Half angle 1/e2): 0.4 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.05 mrad
    • Power Stability: < 2%
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Laser head size: 46 x 90 x 225mm
    • Function panel display
    • Adjustable output power via digital controller with 1 mW resolution
    • Optional Analog / Digital Modulation Control: 50 - 1000 Hz: $495.00
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply. (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115±20% VAC - 230±15% VAC / 50 -60Hz (selectable)

    • Optional DC Driven Laser Driver/Controller
    • Size: 44 x 65 x 173 mm
    • Input Voltage: 12 VDC, < 100W
    MeshTel INTELITE, INC. USA   Tel: 775 267 5959, Fax: 775 267 5958
  • Prices are FOB Minden, USA and subject to change without notice.
  • Disclaimer: The specifications are subject to change without notice.

    What's New |  Hot Buy's |  Quotation |  Place Order |  F A Q |  About Us |  Legal

    © 1996 - 2021 MeshTel INTELITE INC.